BULK Oil Distribution Companies (BDCs) have expressed their readiness to import diesel with sulphur specifications of diesel 10 parts per million (ppm) as is traded in Europe at no extra cost to the consumer.
Consequently, the BDCs have called for the standards to be revised to 10ppm and a transition road map to be developed by industry in conjunction with representative consumer groups and Civil Society Groups (CSOs).
Chief Executive Officer (CEO) of Chamber of Bulk Oil Distributors (CBDO), Mr Senyo Hosi, said BDCs find it necessary for the quality of fuels to be improved to protect lives and promote the health of all, including children and adults.
He noted that the CBOD has in conjunction with international traders been exploring trading modules that would ensure that a change in the specifications will not lead to an increase in ex-pump prices.
He explained that after thorough analysis, it was concluded that aligning with Europe Specification of 10ppm would enable Ghana to benefit from some economies of scale and savings from not blending as required for Ghana’s current specification and that would offset any increase in the logistical cost.
“We are, therefore, confident that a move to the 10ppm will not lead to any material increase in price. We expect a Zero to 1% maximum change,” he added.
On the other hand, he said, adopting similar specifications with major players like Nigeria in the sub region, would enable Ghana to share common logistical infrastructure such as Large Supply Vessels and that leads to a cost advantage.
Mr Hosi said this minimises freight cost and enables the savings to be passed on to consumers through competition.
“This is the case for Ghana and makes policy makers concerned about the impact on price should this advantage be lost through the revision of specification outside what may be set by Nigeria.
“In line with this, industry including BDCs earlier indicated that a change in specification would lead to an increase in prices” he added.
He averred that the cost savings and sharing common logistics mentioned may not be achieved if the changes in standards vary from the European Specification of 10ppm and the Nigerian Specification at the same time.
“This is so because the cost advantage aligning with Europe will be lost while there would also be no logistical saving enjoyed by sharing common logistics with Nigeria,” he said.
Mr Hosi noted that in effect, any change in specification that does not align with Nigeria or Europe is expected to lead to significant changes in prices.
”There is, therefore, the need for standards to be revised to reflect a 10ppm requirement which would enable Ghana benefit from the cost advantage of having the whole country’s volumes aligning to the specification as against a few,” Mr Hosi added
In view of the heated discussions that followed the publication on the sulphur content in diesel or gasoil by Public Eye, a Swiss-based organization, Mr Hosi expressed reservations about some misconceptions and misrepresentations that characterized the discussions.
Ghana’s Sulphur specification
The Ghana specification for sulphur in diesel stands at a maximum 3,000 parts per million (ppm).
Hence the lower the sulphur content in PPM terms, the cleaner and better the fuel.
BDCs did not wrong
“BDC supplies to the market have been in the 2000s and 1000s and in some cases we have supplied 50ppm to the market.
“It is, therefor,e untrue that BDC supplies have been substandard. In fact, we supply superior quality compared to the set standards and have in no way breached the laws of Ghana,” Mr Hosi stressed.
“It is, therefore, not the case that BDCs have sought to make extra profits at the expense of the health of consumers,” he added.
NPA led review efforts
The National Petroleum Authority in conjunction with industry has led efforts towards the revision of standards to improve the quality of gasoil supplies.
In 2010, the specifications were revised from 10,000ppm to 5,000ppm and under the current leadership of the NPA, standards have been revised to 3,000ppm since 2014.
As a matter of fact, when BDCs commenced operations in 2007, standards still stood at 10,000ppm but BDCs operated at 5,000ppm.
The NPA’s engagements with industry in 2013 and 2014 were aimed at a 1,000ppm standard but was constrained by logistical and regional (i.e. West Africa) considerations.
In recent times, the NPA has spearheaded efforts with industry to revise the standards to 500ppm or better.
We commend the NPA for the sub-regional leadership it has shown in improving the fuel quality not just for Ghana but West Africa as whole and urge it to remain resolute in its pursuits
Ghana Standards Authority
It must, however, be noted that standards for fuel are set by the Ghana Standards Authority.
The competition among 35 BDCs and the standardisation of specifications do not create opportunities for any BDC to accrue extra profits from using the Ghana specification.
The Finder